moodsperlingtower

Ikelite O-ring Lubricant for all O-rings (Four 1cc Tubes)

Silicone lubricant for Ikelite "O" rings Underwater photographic equipment cannot be watertight unless the O-rings that seal it are flawless. Always carry spare O-rings in your camera case.O-rings are the most important components of your underwater camera system. If the O-ring is lubricated, it will be elastic enough to shape itself uniformly around the channel. If it is dry, there will be too much friction to allow it to reshape itself uniformly. It will not safeguard against flooding.Every time you open the camera to change film, examine the O-ring and service if necessary.Always clean and lubricate after every diving day.When in doubt about the sealing capability of an O-ring, always discard and replace.Never use a sharp or pointed object to remove an O-ring! Use the O-ring remover tool.Don't over grease! Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease is not a sealant; it only protects the O-ring from abrasion. A perfectly greased O-ring looks moist and shiny.

7000# gvw, tandem axles with 4-wheel electric brakes and ezy-lube hubs,16" O/C floor and walls,3/8 plywood walls and 3/4 PRESSURE TREATED plywood floor, spring assist ramp door with flap,4 recessed d-rings in floor,24" stone guard, aluminum fenders, triple tube tongue,(ALL LED LIGHTS),tubular walls and ceiling construction, no show beaver-tail,12 volt lighting, roof vent, chrome front corners,2 5/16 coupler, Bar Lock on 48" SIDE DOOR and FLUSH-LOCK. Box is 24'.

The concept of food-grade lubricant has made me giggle since I first figured out that I needed it (to grease the o-rings on my keg... perverts). The actual product makes me giggle even more.

Haynes Silicone Grease is a food-grade grease that can be used on a variety of application in food and pharmaceutical plants where incidental food contact may occur. Haynes® Silicone Grease is NSF rated H-1 and made from ingredients that are FDA approved. This sanitary grease complies with all regulatory agencies.

Haynes Silicone Grease is specifically formulated with the highest quality silicone fluid and additives to meet the unique demands placed on all types of food processing equipment. This grease will prevent valves and o-rings from sticking in both high temperature and low temperature (freezing) conditions. Haynes® Silicone Grease can be used in high vacuum or pressure systems to seal synthetic rubber and plastic parts that come in contact with metal. The grease is inert and will resist many chemicals. It can be effectively used on EPDM seals where grease compatibility is a concern.